A New Methodology for Fiber Optic Strain Gage Measurements and its Characterization
Study of the diamond deposition on cemented carbides containing 10 wt.% Co with a tungsten intermediate layer
Monte Carlo simulation of the formation of MCs+ molecular ions
Quantitation of major elements with secondary ion mass spectrometry by using M2+-molecular ions
Correlation between the OES plasma composition and the diamond film properties during microwave PA-CVD with nitrogen addition
Investigation of the formation of M2+-molecular ions in sputtering processes
Investigation of the formation process of MCs+-molecular ions during sputtering
Fiber optic deformation and temperature measurement system for application at underground radioactive waste repositories
Geodetect: a new step for the use of fibre Bragg grating technology in soil engineering
Fibre Bragg gratings in cables for remotely operated vehicles
Measurement of multi-axial stress/strain in composite elements with Bragg sensors
Feasibility Study on Measuring Axial and Transverse Stress/Strain Components in Composite Materials using Bragg Sensors
Fiber Optic Sensing System for discreminating multi-axial strain components in composite elements
High dynamic strain measurements and aliasing suppression capability using a PDA-based spectrometer design
A thin foil optical strain gage based on silicon-on-insulator microresonators
Three-dimensional strain and temperature monitoring of composite laminates
Sensing properties of Bragg grating in highly birefringent and single mode photonic crystal fiber
Sensing applications of photonic crystal fibres
Feasibility study of an embedded Multi-Axial fibre bragg grating sensor
Strain Monitoring in Thermoplastic Composites with Optical Fiber Sensors: Embedding Process, Visualization with Micro-tomography, and Fatigue Results
Dynamic fiber optic strain measurements and aliasing suppression with a PDA-based spectrometer
Investigation of correlations between parameters defining the state of sputtered particles
Evaluation of the energy selection optics of Cameca IMS instruments using Fast Fourier Transforms (FFT)
Investigation of the formation of sputtered oxide clusters with the Laser Assisted Sputtered Neutral Mass Spectroscopy technique (LASNMS)
Analysis of the operating conditions of ETP electron multipliers used on Cameca IMS instruments
Monte Carlo simulation of the formation of M2+ - molecular ions sputtered from metallic materials
Delamination detection with fibre Bragg gratings based on dynamic behaviour
Strain Monitoring of FRP Elements Using an Embedded Fibre Optic Sensor
High Strain Monitoring during Fatigue Loading of Thermoplastic Composites Using Imbedded Draw Tower Fibre Bragg Grating Sensors
Photonic skins for optical sensing: highlights of the PHOSFOS Project
Arrays of Regenerated Fiber Bragg Gratings in Non-Hydrogen-Loaded Photosensitive Fibers for High-Temperature Sensor Networks
250 kHz sampling rate FBG interrogator with strong anti-aliasing signal processing
Installation and test procedures of optical strain gauges for aeronautical applications
A 40 ksamples/sec spectrometer based FBG interrogator capable of simultaneously measuring more than 16 FBG sensors
Photonics Explorer: Revolutionizing Photonics in the Classroom
Stretching the limits for the decoupling of strain and temperature with FBG based sensors
Interrogation and mitigation of polarization effects for standard and birefringent FBGs
Ground Testing of Satellite Structures using Optical PM-FBG Sensors to Simultaneously Measure Strain and Temperature
Distributed strain and curvature measurements based on tailored draw tower gratings
Fiber Bragg grating sensors written by femtosecond laser pulses in micro-structured fiber for downhole pressure monitoring
FBGs written in specialty fiber for high pressure/high temperature measurement
Feasibility study on measuring axial and transverse stress/strain components in composite materials using Bragg sensors
Curvature and Shape Sensing for Continuum Robotics using Draw Tower Gratings in Multi Core Fiber
Micro-structured fiber Bragg grating based pressure sensors in a downhole-like hydrogen rich environment
Packaged FBG based optical fiber sensor for simultaneous pressure and temperature monitoring
Effect of hydrogen gas on FBG-based optical fiber sensors for downhole pressure and temperature monitoring
Offshore field validation of a FBG based pressure/temperature sensor during a wireline intervention
Improved FBG-Based Shape Sensing Methods for Vascular Catheterization Treatment
4000 Serial FBG Sensors Interrogated with a Hybrid CDM-WDM System
Hybrid CDM-WDM Scheme for Interrogating 2×2000 Serial FBG Sensors
A CDM-WDM Interrogation Scheme for Massive Serial FBG Sensor Networks
FBG-Based Estimation of External Forces Along Flexible Instrument Bodies
Accuracy Evaluation of a CDM-WDM Interrogator for Quasi-Distributed FBG Sensing
Local One-Dimensional Motion Estimation Using FBG-Based Shape Sensing for Cardiac Applications
Precision Measurements with a Code-Division Multiplexing Interrogator on Large Draw Tower Grating Arrays
Dynamic sensing of large arrays of draw tower gratings using code division multiplexing
Three-dimensional catheter tip force sensing using multi-core fiber Bragg gratings
Force Control With a Novel Robotic Catheterization System Based on Braided Sleeve Grippers
LNG Flexible Integrated with Fiber Optic Distributed Leak System enhancing safety, integrity monitoring and life assessment.
